Online Electronics
WAGO » Electronics » Series 763 » WAGO 763-1508

WAGO 763-1508

763-1508 WAGO 763-1508

WAGO 763-1508
Part # 763-1508
Manufacturer Wago
Condition New
Price: $ 188.06

Please Contact Us for Stock Availability

Qty
Order by 3PM MST (subject to stock availability) same day shipping available!
8-channel digital output; 24 VDC 0.5 A; High-Speed
Got questions? Send us a message or call us at 1-800-335-5111 for additional assistance.
8-channel digital output; 24 VDC 0.5 A; High-Speed

Features

Approvals

  • Underwriters Laboratories Inc., UL, E175199, UL 61010-2-201
  • Underwriters Laboratories Inc., UL, E198726, UL 121201

Specifications

Technical Data

  • Device-specific: Synchronization mode: time-synchronized, freewheeling
  • Number of digital outputs: 8
  • Total number of channels (module): 8
  • Signal type: Voltage
  • Voltage signal type: 24 VDC
  • Actuator connection: 8 x (2-wire)
  • Output characteristic: Semiconductor, push-pull
  • Output current per channel: 0.5 A
  • Output current (module): 4 A
  • Protection against incorrect wiring: Short-circuit-protected || Self-resetting
  • Switching frequency (max.): 15 kHz; Resistive load
  • Switching frequency (max.) (2): 3 Hz; Inductive load
  • Switching frequency (max.) (3): 500 Hz; Lamp load
  • Load type: Resistive: 48 Ω … 16 kΩ, at 24 V; Inductive: DC13; Lamp load: up to 5 W
  • Output voltage: 24 VDC
  • Load type of switching frequency: Resistive load
  • Delay time T_on from 0 to 1: 2 µs
  • Delay time T_off from 1 to 0: 2 µs
  • Data width: 8-bit channel status
  • Supply voltage (field): 24 VDC, SELV (-25 … +30 %); UF
  • Power consumption, field supply (module with no external load): 24 mA
  • Power loss Pl: 1.6 W
  • Isolation (field/system): Min. 1000 VDC (1 min); per EN/UL 61010-2-201
  • Number of incoming power jumper contacts: 2
  • Number of outgoing power jumper contacts: 2
  • Current carrying capacity (power jumper contacts): 12 A
  • Marking: Cl I, Div 2, Group A, B, C, D, T4

Connection Data

  • Connection technology: inputs/outputs: 16 x Push-in CAGE CLAMP®
  • Connection type (1): Inputs/outputs
  • Solid conductor: 0.25 … 1.5 mm² / 22 … 16 AWG
  • Fine-stranded conductor: 0.25 … 1.5 mm² / 22 … 16 AWG
  • Strip length: 8 … 9 mm / 0.31 … 0.35 inch
  • Note (conductor cross-section): Insulated ferrule: 0.75 mm² (max.)

Physical Data

  • Width: 12 mm / 0.472 inch
  • Height: 105 mm / 4.134 inch
  • Depth: 75 mm / 2.953 inch

Mechanical Data

  • Mounting type: DIN-35 rail

Material Data

  • Fire load: 0.047 MJ
  • Weight: 73.000 g
  • Conformity marking: CE

Environmental Requirements

  • Surrounding air temperature (operation): -25 … 60 °C (Horizontal, typical control cabinet installation; −25 … +50 °C, other mounting positions)
  • Surrounding air temperature (storage): -40 … 85 °C
  • Temperature range of the connecting cable according to EN 61010-2-201: ≥ (Tsurrounding air + 25 K)
  • Temperature range of connecting cable per UL 61010-2-201 (min.): 85 °C
  • Protection type: IP20
  • Pollution degree (5): 2
  • Operating altitude: Without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 3000 m (0.5 K/100 m)
  • Mounting position: Horizontal, typical for control cabinets (nominal mounting position); horizontal (floor mounting position); standing (vertical at bottom)
  • Relative humidity (without condensation): 95 %
  • EMC immunity to interference: Per EN 61000-6-1, -2
  • EMC emission of interference: Per EN 61000-6-3, -4

Commercial Data

  • Country of origin Sales Organisation Germany: DE
  • GTIN: 4055143975643
  • Customs tariff number Sales Organisation Germany: 85371098990
: *
: *
: *
 
 

Copyright © 2004- by On-Line Electronics, Inc., All Rights Reserved - Developed by EngNet - Shipping & Returns  |  Terms & Conditions  |  Privacy Policy