Specifications

Notes

• Note: Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.

Control Circuit

• Nominal input voltage UN: DC 12 V
• Input voltage range (low level): DC 0 … 5 V
• Input voltage range (high level): DC 9.6 … 14.4 V
• Nominal input current at UN: 3.2 mA

Load Circuit

• Circuit type: 2-wire connection
• Limiting continuous current: 5 A
• Peak output current: 25 A
• Nominal output voltage: DC 24 V
• Output voltage range: DC 3 … 30 V
• Voltage drop at output (max.): ≤ DC 0.2 V
• Turn-on time: ≤ 200 µs
• Turn-off time: ≤ 450 µs
• Switching frequency: ≤ 100 Hz

Signaling

• Status indicator: Red LED

Safety And Protection

• Rated voltage: 300 V
• Overvoltage category: II
• Pollution degree: 2
• Dielectric strength, control/load circuit (AC, 1 min): 2.5 kVrms
• Insulation type (control/load circuit): Basic insulation
• Insulation type (adjacent devices): Reinforced insulation (safe isolation)

Connection Data

• Connection technology: CAGE CLAMP®
• Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
• Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
• Strip length: 5 … 6 mm / 0.2 … 0.24 inch

Physical Data

• Width: 6 mm / 0.236 inch
• Height: 91 mm / 3.583 inch
• Depth from upper edge of DIN-rail: 56 mm / 2.205 inch

Mechanical Data

• Mounting type: DIN-35 rail

Material Data

• Fire load: 0.313 MJ
• Weight: 19.099 g

Environmental Requirements

• Surrounding air temperature (operation at UN): -25 … 70 °C
• Surrounding air temperature (storage): -40 … 70 °C
• Processing temperature: -25 … +50 °C
• Relative humidity: 5 … 95 % (no condensation permissible)
• Operating altitude (max.): 2000 m

Standards And Specifications

• Standards/Specifications: EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || EN 61373

Commercial Data

• Packaging type: Box
• Country of origin Sales Organisation Germany: DE
• GTIN: 4055143605397
• Customs tariff number Sales Organisation Germany: 85365005000