Programming languages per IEC 61131-3: Instruction List (IL) || Ladder Diagram (LD) || Function Block Diagram (FBD), Continuous Function Chart (CFC) || Structured Text (ST) || Sequential Function Chart (SFC)
Programming environment: WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
Device specification: Function per IEC 60870-5-101 and -104 library: Client and server; Function per IEC 61850 and 61400-25 library: Server; Conformity document: see www.wago.com
Bus segment length (max.): ETHERNET: 100 m; Serial interface: 1200 m
Transmission medium (communication/fieldbus): ETHERNET: Twisted pair S-UTP; 100 Ω; Cat. 5; Serial interface: Shielded Cu cable 2 (4) x 0.25 mm²
Internal memory (flash): 2 MB
Program memory: 1024 kByte
Data memory: 1024 kByte
Non-volatile software memory: 30 kB
Memory for fieldbus input variables (max.): 512 Byte
Memory for fieldbus output variables (max.): 512 Byte
Number of modules per node (max.): 250
Number of modules without a bus extension (max.): 64
Number of information objects: 150
Number of control stations: 4
Input and output (fieldbus) process image (max.): 1953.125 Byte/1953.125 Byte
Indicators: LED (LINK) green: Network connection LED (MS, NS) red/green: Status of node, network; LED (TxD/RxD) green: data exchange; LED (I/O, USR) red/green/orange: Local data bus status, status programmable by user; LED (A, B) green: System power supply status, field supply
Supply voltage (system): 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection)
Input current (typ.) at nominal load (24 V): 500 mA
Power supply efficiency (typ.) at nominal load (24 V): 87 %
Power consumption (5 V system supply): 300 mA
Total current (system supply): 1700 mA
Supply voltage (field): 24 VDC (-25 … +30 %); via power jumper contacts
Current carrying capacity (power jumper contacts): 10 A
Number of outgoing power jumper contacts: 3
Isolation: 500 V system/field
Connection Data
Connection technology: communication/fieldbus: EtherNet/IPTM: 1 x RJ-45; Modbus TCP/UDP: 1 x RJ-45; Modbus RTU: 1 x D-sub 9 socket; RS-232 serial interface: 1 x D-sub 9 socket; Telecontrol protocol IEC 60870-5-101/-103: 1 x D-sub 9 socket; Telecontrol protocol IEC 60870-5-104: 1 x RJ-45; Telecontrol protocol IEC 61850: 1 x RJ-45; Telecontrol protocol DNP3: 1 x RJ-45 or D-sub 9 socket
Connection technology: system supply: 2 x CAGE CLAMP®
Connection technology: field supply: 6 x CAGE CLAMP®