On-Line Electronics will be closed for the Holidays from Tuesday, December 24th, 2024 through Wednesday, January 1, 2025. There will be no shipping or receiving during this time. We will be open for business on Thursday January 2, 2025. From our families to yours, HAPPY HOLIDAYS!
UL International Germany GmbH, UL, E175199 Sec.5, UL 508
Specifications
Technical Data
Number of analog inputs: 4
Total number of channels (module): 4
Signal type: Current || Voltage
Signal type (current): 0 … 20 mADC; 4 … 20 mADC
Voltage signal type: 0 … 10 VDC; -10 … +10 VDC
Signal type (configurable): Yes
Sensor connection: 4 x (2-wire, 3-wire, 4-wire); External shield via knurled nut
Signal characteristic: Differential
Resolution [bit]: 16 bits
Input resistance (max.): 200 Ω
Process data width: 8-byte data + status
Parameterizable functions: I/O diagnostics (per module): Short circuit/overload (encoder supply); Undervoltage (ULS + UA) || I/O diagnostics (per channel): Measurement range overflow/underflow or wire break at 4 … 20 mA; Overcurrent; Limit value violation (min./max.) || Online simulation (per module): Diagnostics || Online simulation (per channel): Lock/Unlock; Simulation value: according to measurement range; Diagnostics || Measurement range (per channel): Parameterizable || Input filter (per channel): 50 Hz/ 60 Hz/ Filter "Off" || Limiting values (per channel): Min./Max. || Substitute value (per channel): Value
Protection: Reverse voltage protection for ULS + Uo; Short circuit protection for sensor supply
Internal resistance: 100 kΩ
Measurement error (reference temperature): 25 °C
Measurement error – deviation (max.) from the upper-range value: 0.2 %
Temperature coefficient: ≤ 100 ppm/K of measurement range
Sampling delay (channel/channel): 100 µs
Sampling delay (module): 1 ms
Sampling repetition time: 1 ms
Supply voltage (system and sensor): 24 VDC(-25 … +30 %); Logic and sensors (ULS)
Power consumption (system and sensor): 50 mA
Power consumption, system and sensor (note): + sensors (max. 400 mA)
Supply voltage (field): 24 VDC (-25 … +30 %); Actuators (UA), for transmission only
Power consumption, field supply (module with no external load): 5 mA
Isolation: 500 V supply/system bus
Indicators: LED (F) red: Error status; LED (SB) green/red/orange: System bus status; LED (ULS, UA) green: Power supply status; LED (Ch1 … Ch4) yellow: Status AI 1 … AI 4; LED (Er1 … Er4) red: Error AI 1 … AI 4; Non-retentive displays
Current carrying capacity (supply connections): 8 A
Monotonicity without error codes: Yes
Conversion method (2): SAR
Conversion time (2): 1 ms
Maximum error over the full temperature range: ≤ ±0.6 % of the measurement range
Voltage-proof: Up to 32 V (internal current limitation)
Connection Data
Connection technology: inputs/outputs: 4 x M12 socket; A-coded; 5-pole
Connection technology: field supply: 1 x M12 plug; 4-pole; A-coded; 1 x M12 socket, 4-pole, A-coded
Connection technology: system supply: 1 x M12 socket; 4-pole; A-coded; 1 x M12 plug; 4-pole; A-coded
Connection technology: system bus: 1 x M12 socket, 5-pole, B-coded, shielded; 1 x M12 plug, 5-pole, B-coded, shielded
Connection requirement, permissible cable length: 30 m
Connection requirement (permissible cable type): Analog inputs: unshielded