Online Electronics
Brands » Brady »
Brady Identification Solutions
Brady ToughStripe™ Floor Marking
TOUGHSTRIPE Floor Marking
Back to Main Brady Page
General Information
Product Overview
5S Floor Marking Color Standard
ToughStripe™ Products
Floor Marking Polyester
Print-On-Demand
Floor Labels for
GlobalMark®2 Printer
Print-On-Demand
Floor Labels for
BMP™71 Printer
Floor Marking Signs with Anti-skid Tread
Premium 5S Marking Kits
Demo Videos - Watch on YouTube
Application and Removal
Application of Pre-Spaced Shapes
Printable Floor Labels
Forklift Durability Test
Brady ToughStripe™ - 5S Floor Marking Color Standard
 
Use As the border color for:
Yellow Aisleways, traffic lanes and work cells
White Equipment and fixtures (workstations, carts, floorstand displays, racks, etc.) not otherwise color coded
Blue, green and/or black Materials and components, including raw materials,work-in-progress and finishedgoods
Orange Materials or product held for inspection
Red Defects, scrap, rework, and red tag areas
Red & white Areas to be kept clear for safety/compliance reasons(e.g., areas in front of electrical panels, firefighting equipment, and safetyequipment such as eyewash stations, safety showers and first aid stations.)
Black & white Areas to be kept clear for operational purposes (notrelated to safety and compliance)
Black & yellow Areas that may expose employees to special physicalor health hazards.
 
Floor Marking Guidelines:
Use as few colors as possible. This will make it easier for employees to remember the intended meaning of each color and reduce the number of floor marking products that must be kept in inventory.
     
Color coding workcell and equipment borders. Some companies choose to mark equipment locations using the same color employed for aisleways and work cell boundaries. This has the benefit of simplicity. However, consideration should also be given to the fact that the overall layout of lanes and sectors within the plant is made more visually clear when different colors are used for these purposes. Equipment
     
Materials Area Color coding material storage areas. Use the same border color for all material storage areas unless there is an important reason for differentiating between raw materials, work in progress and finished goods. As an alternative, consider using one border tape color in conjunction with different colored labels to visually distinguish between the various material types.
   
Color coding non-material storage fixtures. Floor markings for fixtures such as racks that hold raw materials, work in progress or finished goods should be color coded in green, blue and/or black. Otherwise use white or gray to mark the location of all other fixtures. Materials Area
     
Keep Clear - Safety Area Color coding areas to be kept clear for safety and compliance. Some companies use red or red-and-white stripes in front of firefighting equipment, and green or green-and-white stripes in front of safety equipment. For simplicity sake, however, we recommend standardizing on one color for all applications where the intent is to keep the area in front of equipment clear for safety or compliance reasons. That said, we also recommend that the firefighting and safety equipment itself - as well as any associated wall signage - be color coded using red and green, respectively, to enhance visibility and facilitate easy location of the equipment from a distance.
     
Color coding areas in front of electrical panels. Under this standard, red and white should also be used to mark the floor in front of electrical panels. Some facilities use black and yellow to indicate the presence of an electrical hazard, but the primary purpose of the marking is to keep the area in front of the panel clear. Danger labels should be displayed on the outside of the panels to warn employees of potential shock and arc flash hazards.
     
Keep Clear Area Color coding operational “keep clear” areas. Use black and white marking to indicate that an area should be kept clear for operational reasons, such as ensuring sufficient clearance for forklifts. As objects without a home tend to naturally congregate in open areas, employ black and white marking to discourage the use of open floor space for unintended purposes.
     
Color coding hazardous areas or equipment. Black and yellow striped marking should be used as a border around any area or piece of equipment where employees may be inadvertently exposed to a special hazard. For example, use black and yellow borders around flammable or combustive material containers. The intent of the black and yellow border is to indicate that special caution should be exercised when entering and working in the area. Hazard Area